Item
Piezo Morse Response
Keying Parameter Procedure
1
None
Play Message #1 Plays message #1 (if there is one)
2
E
Play Message #2 Plays message #2 (if there is one)
3
S
Speed Adjust Press dah paddle to increase: press dit paddle to decrease
4
T
Tune Keys xmtr for tuning. To unkey, press either paddle
5
A
Administration Release button immediately on hearing 'A'. To move to menu #9, push and hold
6
I
Input Message Set-up To move to menu item #7, push button quickly, release, wait 1 second, push & hold.
7
1
Message #1 input Key in message #1 up to 50 characters. Push and release button to review message.
8
2
Message #2 input Key in message #2 up to 50 characters. Push and release button to review message.
9
P
Paddle select Press paddle you wish to be the dit paddle.
10
A
Audio select Press dit paddle to enable sidetone piezo, press dah to disable..
11
SK
Straight-Key select Press either paddle to enable. To return to keyer mode, cycle back to item 11 and press either paddle.
12
M
Iambic mode

Press dah for iambic mode B (common). Press dit for iambic mode A (older style). Default mode is iambic mode B.

13
B
Beacon mode Press either paddle to enable. Then access menu item #1 or #2 to start beacon play of message. To disable, cycle back to item #13 and press either paddle.
14
K
Keyer mode Release button and keyer returns to normal operation.

  • To erase a message, go to it on the menu (Item 7 or 8) and press either paddle -- entire message will be erased.
  • To play message #1 push and immediately release button. If you hear a dit, you have held the button down too long!
  • If you don't release button immediately upon hearing 'A' the keyer will move to menu item #14.
  • A character is any Morse letter, single digit or punctuation mark.

Home | Products | About | More Info | Email For Info | Webmaster

Copyright Paddlette Co. 2000